DIY and Entry-Level 3D-Scanner Forum

1) 3D-printed parts: http://www.thingiverse.com/thing:52850

2) An ACER K11 LED Beamer: http://amazon.de/Acer-K11-LED-Projektor ... 596&sr=8-1

US: http://amazon.com/Acer-EY-K2801-009-K11 ... s=acer+k11

3) A Logitech C615 Webcam: http://amazon.de/Logitech-960-000736-HD ... 328&sr=8-1

US: http://amazon.com/Logitech-Portable-Web ... itech+c615

4) A Macro Lens Kit for the Bearmer: http://ebay.at/itm/37mm-Nahlinsen-Set-4 ... 519wt_1139

US: http://amazon.com/Vivitar-Close-Up-Macr ... +lens+37mm

5) A 360 Degree Servo: http://conrad.at/ce/de/product/209150/M ... ststoff-JR

US: http://www.pololu.com/catalog/product/522

6) An Arduino Uno: http://amazon.de/Arduino-UNO-R3/dp/B008 ... 457&sr=8-1

US: http://amazon.com/Smart-Projects-Arduin ... rduino+uno

7) 4x 10x10mm wood, or amluminum sticks:

176 mm, 314 mm, 432mm and 122mm

8) The Scanner Software: http://david-laserscanner.com/?section=Downloads

!!! Please note that you need the full edition of David to save the result of the fusion process !!!

9) A cardboard-box

_________________
Bernhard
www.virtumake.com

Would you think it possible to make the VirtuCube using a Logitech Webcam Pro 9000 and a Microvision ShowWX Laser Pico Projector? If so, what adaptations would have to be made?

Yes, I think it's possible. You just need to adapt the holders for the webcam and the beamer.

_________________
Bernhard
www.virtumake.com

I can't find any information on which of the lenses from that kit to use or how to use them. I guess you glued one of the lenses to the beamer? Which one and how do you know how far in front of the beamer lense it needs to be?

I used the +1 lens and glued it on the beamer.

_________________
Bernhard
www.virtumake.com

Can you use the same projector for the VirtuCube and the VirtuZoom? Or do you have to glue a different lens?

Does it matter how far in front of the beamer lens the glued lens is?

Can anyone recommend a 360 Degree Servo motor (or any other type of motor) that can handle the weight of say a 150kg person. I plan to scan someone using a motorized turntable much like the one used here: http://www.thingiverse.com/thing:28454

Kind regards,
Berkal